CE Smith Post Style Trailer Guide-Ons

CE Smith Boat Trailer Guide-Ons - Post-Style

CE Smith boat trailer guide-ons make it easier to see the end of the trailer while on the road or when loading or unloading. The boat trailer guides protect your craft from damage and provide an additional measure of safety while trailering as they provide a visual aid for other drivers.

CE Smith Boat Trailer Guide-Ons Feature:

• Galvanized posts extend more than half-way into each non marring heavy duty 2" PVC tube for extra stability
• Boat trailer guides may be mounted on top of the frame for extra height
• Complete to fit frame up to 3" wide x 4-1/4" high
• One box comes with both sides of the trailer

Sizes Available:

Specifications:

Boat trailer guides adjust out to 13" each side

• Fits Frames up to 3"W x 4-1/4"H
• 1-1/2" square, 16 gauge pre-galvanized steel uprights

How to Install CE Smith Post-Style Trailer Guide-Ons

Needed for Installation:

• #2 Phillips screwdriver
• Pliers
• 1/8” Drill
• 9/16” Deep socket

CE Smith Boat Trailer Guide-On Installation Instructions

• Loosely assemble the mounting brackets and U-bolts onto your trailer frame.
• Brackets may be mounted above or below the frame.
• Mount as far back as possible.
• Mount close to a cross member for more rigidity.
• Slide the short end of the uprights into the brackets.
• Slide PVC posts over the uprights engaging the no-rotate notch with the lance.
• Loosely tighten the U-bolts.
• Adjust trailer guide posts to fit your boat.
• Less than 1 inch of offset from the boat is typical.
• Mount as far back as possible for the guides to be most helpful during loading.
• Tighten U-bolts
• Spacing will change during tightening.
• Re-adjust your spacing and re-tighten as needed.
• Push caps down firmly onto your guide-on posts.

**For maximum benefit when loading your boat, mount the posts as far back on the trailer frame as possible and as close to the boat as possible**

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov