Bennett BOLT Electric Trim Tab Actuator

Bennett BEA2000 BOLT Electric Trim Tab Actuator

Bennett BOLT Electric Actuators feature superior seal design inspired by over 50 years of Bennett's proven success in hydraulic trimming techniques.

• Robust, water-tight black nylon actuator provides trouble-free operation for years to come
• Wires and seals completely protected from harsh marine environment, preventing problematic leakage and marine growth
• Installation is fast and simple without the need to assemble the actuator yourself

How to Install Your Bennett BOLT Electric Actuator

• Carefully insert the end of the electrical wires through the transom hole.
• Apply 3M 5200 waterproof sealant on the mounting surface and around the wiring of the new actuator.
• Mount the upper hinge of the new actuator to the transom using the supplied #14 x 1-1/2" screws with a #3 Phillips head screw driver.
• Install the lower hinge to the actuator using the supplied stainless steel pin.
• Mount the trim tab to the lower hinge of the new actuator using the (2) 1/4-20 x 3/4" supplied screws using a #2 Phillips head screw driver.
• Install the wiring connector onto the wires.

Click to Download Bennett BOLT Electric Actuator Installation Instructions

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov