Bilge Pumps

7739
      • Bilge Pump Hose - By The Foot
        $1.71
        $1.49

        This .75" Heavy corrugated polyethylene hose provides outstanding flexibility. Resists oily bilge acids and sea water. Custom molded cuff every foot for easy installation and clamping. Ideal for electric and manual bilge pumps and livewell aerators. THIS...

        Choose Options
      • Johnson Pump Replacement Cartridge Motor
        $27.01
        $23.49

        Mayfair Replacement Cartridge Bilge Pump Motors by Johnson Pump Replace your boat’s worn bilge pump cartridge with Johnson’s Pump replacement cartridge motor. This kit is a universal replacement for all Johnson Pump cartridge bilge pumps and...

        Choose Options
      • T-H Marine Stainless Steel Hose Clamp
        $6.89
        $5.99

        T-H Marine Stainless Steel Hose Clamps T-H Marine stainless steel hose clamps are completely made with 300 series stainless components, including the tightening screw. Standard worm gear construction. Packaged in pairs.

        Choose Options
      • Johnson Pump Cartridge Bilge Pump
        $34.49
        $29.99

        Mayfair Replacement Johnson Pump Cartridge Bilge Pump Johnson Pump Cartridge Bilge Pumps are direct replacements to the popular Mayfair Cartridge Bilge Pumps and are designed to make cleaning and maintenance easy! Johnson Bilge Pump Cartridges can be...

        Choose Options
      • Johnson Pump Proline Bilge Pump
        $47.71
        $41.49

        Mayfair Replacement Proline Bilge Pump by Johnson Pump The Johnson Pump Proline Bilge Pump is a crucial boat accessory to remove excess water from your vessel. Proline Bilge Pumps are both ignition protected and 100% submersible. Equipped with a 316...

        Choose Options
      • Johnson Pump Automatic Bilge Pump
        $80.49
        $69.99

        Mayfair Replacement Automatic Bilge Pump by Johnson Pump The Johnson Pump Automatic Bilge Pump is designed to directly wire in to your craft’s electrical system with ease. Automatic bilge pumps are particularly useful by operating with a sensor...

        Choose Options
      • Rule Mate Automatic Bilge Pump
        $85.09
        $73.99

        Rule Mate Automatic Bilge Pump Rule has been building bilge pumps for over 30 years. These pumps are preferred by recreational boaters, yachtsmen, and by commercial fishermen everywhere. An all-in-one pump and switch, Rule Mate automatic bilge pumps are...

        Choose Options
      • Johnson Pump Electro-Magnetic Bilge Pump Float Switch
        $74.99
        $46.49

        Johnson Pump Electro-Magnetic Bilge Pump Float Switch The Johnson Pump Electro-Magnetic Bilge Pump Float Switch offers a combination of reliable solid state electronics and a sealed float switch. It activates the bilge pump at 2" water...

        Add to Cart
      • Johnson Pump Automatic Bilge Pump Float Switch
        $24.49
        $14.99

        Mayfair Replacement Automatic Bilge Pump Float Switch by Johnson Pump The Johnson Pump Automatic Bilge Pump Float Switch is constructed of ultrasonically sealed thermo-plastic housing. An anti-spike feature prevents rapid on-off cycling and turns on...

        Add to Cart
      • Rule-A-Matic Plus Automatic Bilge Pump Float Switch 40A
        $81.99
        $51.49

        Rule-A-Matic Plus Automatic Bilge Pump Float Switch 40A The Rule-A-Matic Plus Automatic Bilge Pump Float Switch features a strong, fully integrated, and impact-resistant cover that protects against debris and jamming. It activates when the...

        Add to Cart
      • Rule-A-Matic Float Switch 35A
        $63.99
        $39.99

        Rule-A-Matic Bilge Pump Float Switch 35A The Rule-A-Matic Bilge Pump Float Switch is designed for automatic on/off bilge pump control. Rule-A-Matic Plus bilge switches have 14 gauge highly abrasive resistant, marine-grade blocked wire and exclusive...

        Add to Cart
      • Rule Non-Automatic 12 Volt Bilge Pump With 1-1/8'' Discharge
        $128.21
        $111.49

        Rule Non-Automatic 12 Volt Bilge Pump With 1-1/8'' Discharge The Rule Non-Automatic 12 Volt Bilge Pump With 1-1/8'' Discharge features a high pumping capacity and reliability at a lower cost. Containing more exclusive design features than any comparable...

        Choose Options
      • Beckson Thirsty-Mate Hand Bilge Pump
        $49.99
        $33.99

        Beckson Thirsty-Mate Hand Bilge Pump The Beckson Marine Thirsty-Mate Bilge Pump is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your Thirsty-Mate hand pump becomes clogged, simply remove the foot...

        Add to Cart
      • Bilge Pump Hose - 6ft Section
        $10.49

        Bilge Pump Hose - 6ft Section Black corrugated flexible hose for bilge pumps, livewells and areator systems cuffed every foot for cutting or clamping. .75" Diameter 6ft Length. Available in 3/4" or 1 1/8" Diameters.

        Choose Options
      • Sea Dog Bilge Pump Switch Panel w/ Circuit Breaker
        $32.99
        $23.49

        Sea Dog Bilge Pump Switch Panel Features: The Sea-Dog 423040 Bilge Pump Switch Panel is injection molded ABS for maximum durability and corrosion resistance. This deluxe version comes with a three way switch allowing both Automatic and Manual...

        Add to Cart
      • Mayfair First Mate Bilge Pump 400 Gph
        $39.99
        $24.99

        Johnson Pump First Mate Bilge Pump 400 GPH The Johnson Pump First Mate Bilge Pump was designed specifically for Pontoon livewell and PWC bilge applications. This pump is ideal for situations where space is limited and ease of maintenance is desired. The...

        Add to Cart
      • Johnson Ultima Automatic Bilge Pump
        $84.51
        $73.49

        Johnson Ultima Automatic Submersible Bilge Pump w/ Integrated Switch The Johnson Ultima Bilge Pump is a sleek, reliable and compact unit with an integrated switch ready to install and run for years. Ultima Bilge Pumps can be manually operated via the...

        Choose Options
      • Johnson Ultima Electronic Automatic Switch
        $69.99
        $43.49

        Johnson Ultima Automatic Bilge Pump Switch The Johnson Ultima Switch uses the patented Mirus field effect detector cells, producing micro-electrical fields that detect disruptions caused by water and fluids. The detector cells are totally sealed and are...

        Add to Cart
      • Rule Non-Automatic 1100 GPH Bilge Pump 27DA
        $91.99
        $57.99

        Rule Non-Automatic 1100 GPH 12 Volt Bilge Pump 27DA Rule Non-Automatic Bilge Pumps deliver ultimate pumping performance in an easy-to-install pump. It has an optimized impeller to provide greater flow at the same amperage. This bilge pump features back...

        Add to Cart
      • Rule 1100 GPH Automatic Bilge Pump 27SA
        $217.99
        $137.49

        Rule 1100 GPH Automatic Bilge Pump 27SA The Rule 1100 GPH Automatic Bilge Pump provides the ultimate pumping performance, which helps keep your bilge clear of nuisance water. Rule pumps are tested to the highest standards to deliver the best performance...

        Add to Cart

      Choosing the Right Bilge Pump for Your Boat

      A bilge pump keeps your boat dry by removing excess water from the hull caused by leaks, rain, or waves. Proper bilge pumping prevents water buildup that can harm stability and onboard equipment. Small boats often use manual pumps, while larger vessels require automatic pumps with higher GPH capacity. Wholesale Marine offers a wide selection of automatic, manual, and non-auto pumps, hoses, switches, and more from trusted marine brands, ensuring quality replacements, repairs, or upgrades for any setup.

      Bilge Pumps for Small Boats: Compact Yet Powerful Water Removal

      Small recreational boats like dinghies, kayaks, and canoes often rely on compact bilge pumps for effective water removal. These pumps are designed for limited spaces but deliver powerful performance. When choosing a bilge pump for small boats, prioritize a high GPH rate for quick drainage and a low-profile design for easy installation in tight areas. Wholesale Marine offers reliable, efficient small bilge pumps to help keep your vessel dry and safe.

      Maintaining Your Bilge Pump for Optimal Performance

      Regular maintenance of your boat bilge pumps is crucial for ensuring they perform effectively when needed. A well-maintained bilge pump quickly removes water and reduces the risk of malfunction, helping keep your boat safe and dry. In contrast, neglecting maintenance can lead to clogs, corrosion, and reduced pump efficiency, which can be costly and hazardous. Here are some ways to maintain your marine bilge pump:

      • Inspect the Pump Regularly: Check for any visible signs of wear, cracks, or damage in the pump housing. Regular inspections help you catch minor issues before they turn into major repairs.

      • Clean the Strainer and Inlet: Bilge pump for boats can clog due to debris in the strainer and inlet, reducing water flow and pump efficiency. Remove debris and rinse these parts frequently to maintain optimal flow.

      • Check the Electrical Connections: Corroded connections can prevent the pump from working correctly, especially in saltwater environments. Clean connections and apply anti-corrosion spray to keep the pump reliable.

      • Test the Pump’s Operation: A bilge pump for a boat should be periodically checked to ensure it activates and pumps water effectively. This allows you to confirm that it’s ready for emergencies.

      • Monitor Float Switch Performance: If your pump has a float switch, ensure it moves freely and isn’t obstructed. Clean the switch area regularly to prevent debris from causing malfunctions.

      Expert Advice on Choosing the Right Bilge Pump

      Wholesale Marine offers expert guidance in selecting the right bilge pump for your boat. Our experienced and knowledgeable customer support staff can recommend a bilge pump for a boat, depending on your needs. 

      For most boat owners and operators, we recommend considering the following when choosing the best pump for your vessel’s specific needs. 

      • Consider Your Boat’s Size: Ensure the pump capacity matches the boat size to avoid underperformance and ensure effective water removal. Larger boats need a higher GPH, while smaller boats are suited for manual or an automatic small bilge pump.

      • Assess Typical Boating Conditions: Selecting a pump suited to your boating environment ensures quick, efficient water removal when conditions demand it. Rougher waters or heavy rain may require a pump with a higher capacity. 

      • Corrosion-Resistant Materials: Marine-grade, corrosion-resistant materials are essential for longevity, especially in saltwater. Durable materials reduce the risk of rust and keep the pump functioning efficiently.

      • Check Power Requirements: Ensure your marine bilge pump matches your boat’s electrical system voltage (12V, 24V, etc.). This avoids compatibility issues and helps the pump work optimally.

      • Evaluate Installation Space: Measure available bilge space, as smaller boats may require compact pump models. Choosing a size-appropriate pump ensures ease of installation and access for maintenance.

      Shop Bilge Pumps Today

      At Wholesale Marine, we provide high-quality bilge pumps and accessories from trusted brands to keep your boat safe and dry. Our wide selection includes options for every vessel size and need, all at competitive prices. With same-day shipping, you’ll get your bilge pump quickly so you can get back on the water confidently. Plus, our Captain’s Club Rewards Program lets you earn points and save on future purchases. Shop our bilge pumps today or call 1-877-388-2628 for expert advice and personalized recommendations!