Interlux Vinyl-Lux Solvent 355 - How to Apply

This product has been discontinued

Shop other Interlux Point products

This information provided here has been reproduced courtesy of Interlux. Wholesale Marine reproduced this information on 3/23/2010.

GENERAL INFORMATION

Use Viny-Lux Solvent 355 to ease brush and spray application of vinyl antifouling paints such as VC Offshore, Baltoplate and other products such as Viny-Lux Primewash and Surfacing Putty 257.

PRODUCT INFORMATION

Colour Y355- Clear
Specific Gravity- 0.868
Volume Solids- 0 percent
Typical Shelf Life- 3 yrs
VOC (As Supplied)- 868 g/lt
Unit Size- 1 US Quart

APPLICATION AND USE

Method

Add small increments, in accordance with individual product directions.

Compatibility/Substrates

For use with vinyl antifouling paints only such as VC Offshore and Baltoplate. Also suitable for certain other products including Viny-Lux Primewash and Surfacing Putty 257.

Recommended DFT

TRANSPORTATION, STORAGE AND SAFETY INFORMATION

Storage

TRANSPORTATION:

Viny-Lux Solvent 355 should be kept in securely closed containers during transport and storage.

STORAGE:

Exposure to air and extremes of temperature should be avoided. For the full shelf life of Viny-Lux Solvent 355 to be realised ensure that between use the container is firmly closed and the temperature is between 5 degrees C/40 degrees F and 35 degrees C/95 degrees F. Keep out of direct sunlight.

Safety

DISPOSAL: Container Disposal: Triple Rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill or by other procedures approved by state or local authorities.

GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line.