Boat Fiberglass Repair

Evercoat Sea-Glass 6oz Fiberglass Cloth 44" Width The Evercoat Sea-Glass Fiberglass Cloth is a high strength, flat weave cloth designed for covering large surfaces. This woven fiberglass material is suitable for all marine resins.  Has excellent...

Choose Options

Resins & Gelcoat Liquid Hardener (MEK) Hardening agent for use with all polyester resins and gel coats. Plastic squeeze tube has graduated measure for mixing convenience. Use this Methyl Ethyl Ketone Peroxide catalyst according to the resin/gel coat...

Choose Options

Evercoat PVA Mold Release 8 oz. Evercoat PVA Mold Release is a water-soluble liquid mold release that forms a smooth parting film, allowing a glossy finish on molded surfaces. This product promotes complete cure of Polyester Gel Coat. How to Apply...

Add to Cart

Hawk Epoxy C2 Slow Catalyst The Sea Hawk Hawk Epoxy C2 Slow Catalyst can be used with Hawk Epoxy Resin for building or repairing planes, surfboards, canoes, boats, and many other substrates. Designed for construction or repairs with superior adhesion,...

Choose Options

Hawk Epoxy C3 Fast Catalyst The Sea Hawk Hawk Epoxy C3 Fast Catalyst can be used with Hawk Epoxy Resin for building or repairing planes, surfboards, canoes, boats, and many other substrates. Designed for construction or repairs with superior adhesion,...

Choose Options

Neutral color polyester paste for permanent gelcoat marine repairs. Neatly covers gouges, scrapes and scratches in fiberglass. Coloring agents provide correct color match. Hardener included. 1 Pint ***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES...

Add to Cart

West System 207 Special Clear Hardener Designed by West Marine to provide a clear, moisture resistant, natural wood finish. When blended with the 105 Epoxy Resin the hardener will not blush or cloud in humid conditions. Applies in a thin film that...

Choose Options

The perfect no-run, no-sag polyester resin for marine repairs! May be used on softwoods and fiberglass. Ideal repair for hulls, decks, cabins and tanks. Repairs all boat surfaces, resists impacts and protects against moisture damage. Use with Sea-Glass...

Choose Options

Hawk Epoxy Pump Kit The Hawk Epoxy Pump Kit allows for easy measuring Hawk Epoxy and Catalyst ratios. The user manual explains how to properly prime the pumps, store the pumps, and measure accurately with the pumps. Priming the Hawk Epoxy Pumps For...

Add to Cart

Hi-Bond Styrene Hi-Bond Styrene is a reducer for polyester resins and Gel Coats. Quart

Add to Cart

West System 404 High Density Filler This high density filler by West System is designed to act as an epoxy thickening agent. Created for maximum adhesion properties in hardware bonding where high-cyclic loads are anticipated. Also useful for filleting...

Choose Options

Evercoat Sea-Glass 1.5oz Fiberglass Mat Non-Woven The Evercoat Sea-Glass Fiberglass Mat is best used for bulk "build up" when repairing holes and badly damaged areas. This mat is 100% fiberglass in a non-woven state; also molds and builds for repair of...

Choose Options

Starbrite Aluminum Epoxy Putty Stick Makes permanent and emergency repairs on aluminum boats, outdrives, fuel and water tanks and other aluminum parts. Starbrite Epoxy Putty Stuck forms a high-strength bond in minutes, even under water. No boat should...

Add to Cart

Hi-Bond Pour Foam Hi-Bond Pour Foam is a two-part liquid urethane closed cell foam. For use in hulls and cavities for flotation or insulation. Not affected by gas or oil. 2 Lb. per cubic foot density. Mix ratio is 1 to 1.   2 Quart kit makes 2...

Choose Options

3 flexible plastic spreaders for fast, clean application of body fillers and putties. Pictured in yellow, but are actually red.

Add to Cart

Hawk Epoxy F2 Structural Adhesive Filler The Sea Hawk Hawk Epoxy F2 Structural Adhesive Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for bonding, gap filling, and filleting. When used the mixture allows for...

Add to Cart

Evercoat Everfix Epoxy Resin Evercoat Everfix is an all-purpose epoxy resin for fiberglassing, molding, laminating, repairing. Use this product where superior adhesion is required. Marine applications include all wood, metal, Styrofoam, fiberglass...

Add to Cart

Evercoat Gel-Kote Neutral - Quart Evercoat's Gel-Kote manufacturers the highest-quality, ISO NPG marine finish gel coat used to permanently repair or replace an original, high-gloss finish. Evercoat Gel Kote cures to a hard finish andEvercoat Mold...

Add to Cart

Evercoat Sea-Glass 24oz Fiberglass Woven Roving The Evercoat Sea-Glass Fiberglass Woven Roving is super-heavy, woven cloth for faster buildup and extra strength. Should be used in addition to mat and cloth to acquire the strength needed with...

Add to Cart

Evercoat Sea-Glass 6oz Fiberglass Tape The Evercoat Sea-Glass Fiberglass Tape is perfect for fiberglassing seams, chines, keels, small patch jobs, corners, and edges. Sea-Glass Fiberglass Tape is also excellent for reinforcing seams and small repair...

Add to Cart