Hawk Epoxy F2 Structural Adhesive Filler

Hawk Epoxy F2 Structural Adhesive Filler

The Sea Hawk Hawk Epoxy F2 Structural Adhesive Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. Ideal for bonding, gap filling, and filleting. When used the mixture allows for sag free and easy flow properties for vertical and overhead applications.

The Sea Hawk Hawk Epoxy F2 Structural Adhesive Filler compares to 406 Colloidal Silica

Features:

• Thickens to an off white color
• General purpose thickening additive
• Designed for bonding, gap filling, and filleting
• Workable consistency allows for sag-free and easy flow
• Properties for vertical and overhead applications

Directions For Use:

1. Mix the Hawk Epoxy resin and catalyst
2. Mix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved

• Depending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:
• If you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag
• For laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency
• To ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin/catalyst/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.
• For general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.

Click here to download Hawk Epoxy Application guide

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov