Total Price:
Add to CartInterlux Fiberglass Surface Prep is a mold release agent and wax remover, which precludes the need for sanding bare fiberglass when used with Fiberglass No Sand Primer. It is also used to thoroughly clean the gelcoat and provide a key for the Fiberglass No Sand Primer to be applied. The use of Fiberglass Surface Prep to remove these contaminants is extremely important if full adhesive qualities of Fiberglass No Sand Primer are to be realized. Fiberglass Surface Prep can also be used to remove Amine Blush from clear epoxy and clean previously painted surfaces when prepping to repaint.
Features:
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
APPLICATION INFORMATION:
For use on Fiberglass, clear epoxy and previously painted surfaces. Apply Fiberglass Surface Prep YMA601 to a damp sponge or 3M® maroon Scotch-Brite® pad. Then scrub the surface to be cleaned using moderate pressure. Wipe off with a clean, wet cloth ensuring that no traces of Fiberglass Surface Prep YMA601 remain. Repeat until all residue is removed, changing cloths frequently. As soon as the surface is dry, it is ready to paint. Before application of the primer it is very important that all contamination has been removed. To be certain the contamination has been removed, run water over the surface, if the water beads up or separates, wipe again with Fiberglass Surface Prep YMA601. If more than 4 hours pass without overcoating wipe with a clean wet cloth and allow to dry.
California Residents: 
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
Other Details
Interlux Fiberglass Bottomkote Aqua Antifouling Boat Bottom Paint For a tough, eco-friendly antifouling solution, you can't beat Interlux Fiberglass Bottomkote – it delivers excellent protection...
Choose Options
Interlux Fiberglass Bottomkote NT Antifouling Marine Paint Get the best of both worlds with Interlux Fiberglass Bottomkote NT, a hybrid antifouling paint that combines the durability of a h
Choose Options
Interlux 202Q Fiberglass Solvent Boat Wash and Wax Remover 202 Fiberglass Solvent Wash is a combination of several solvents, some of which are very slow to evaporate from the surface of gel coat...
Add to Cart
Pettit Bottom Prep Fiberglass Dewaxer Pettit Fiberglass Dewaxer is a special blend of solvents, formulated to cut through and remove mold release, grease, and previously applied waxes from the...
Choose Options
Pettit Bio-Blue Marine Hull Surface Prep Bio-Blue Hull Surface Prep is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fiberglass for painting...
Choose Options
Interlux Schooner Marine Varnish Schooner Varnish combines the very best of classic, varnish craftsmanship with the newest technology. Schooner Varnish contains ultra-violet filters to screen the...
Add to Cart
