Yeti Tundra 35 Seat Cushion

Yeti Tundra 35 Seat Cushion

The Yeti seat cushion easily attaches to your Yeti 35 Tundra cooler to create a comfortable seat wherever you are. For routine cleaning and minor stains use a multi purpose spray cleaner with a soft cloth or a damp sponge. Rinse the area with fresh water then dry with a clean lint free cloth.

Cushion Installation Instructions

• Place cooler on sturdy surfaces. Position cushion evenly from left to right and center the snap down flaps on the front of the cooler between the latches.
• Once in position, hold the cushion in place with your forearm and pull the flap taut.
• Keeping the seat cushion and flap in position lift the snap button up and mark the cooler. The mark should be placed at the snap's center if the flap was snapped. Work from one end to the other, repeating steps 2 and 4 for the front flaps.
• Using a Phillips head screwdriver, manually install the snap stud screws at the preplaced marks. Snap on the front flaps then move to the back of the cooler and repeat the process.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov